MARSEAL® Structural Sealant

MARSEAL® Structural Sealant is a Modified Polyether that cures to a durable bond with exposure to atmospheric moisture. It bonds aggressively to MARSEAL® membranes and concrete substrates, and is tough, elastic and waterproof. MARSEAL® Structural Sealant contains no Volatile Organic Compounds (no VOC’S).

Primer #2

Solvent Based Asph. Primer

Marseal® exterior grade, solvent-based asphalt primer. Used to prime the substrate before application of MARSEAL® surface-adhered linings. Acceptable substrates include concrete, masonry block, metal, and wood.

MJ-7000

Joint Tape

Marseal® joint capping system for protection against the ingress of corrosive/reactive liquids into the ground through expansion and control joints. The system can withstand splash and spills of a broad range of chemicals including acids, caustics, oxidizing agents and aromatic and chlorinated solvents. The system is tenaciously bonded to the substrate with Marseal® Structural Sealant.

MJ-3500

Joint Tape

Marseal® corrosion resistant sheet membrane incorporating DuPont Elvaloy® resin, reinforced with dispersed polyester fibers. It is used in conjunction with Marseal® Structural Sealant, to seal and waterproof problematic expansion/contraction joints in secondary containment areas, sumps, water treatment facilities, tunnels, or anywhere joints require sealing.

Termination Bars

MARSEAL® used as mechanical attachment devices for anchoring MARSEAL® membranes at termination points.

Protection Board

Marseal® Protection Board is a mineral-fortified asphaltic core between two layers of high strength reinforced glass fiber mats. When laid over Marseal® membranes, it serves to protect them from damage due to placement of fill or concrete.

Yellow Walkway

MARSEAL® PVC-based matting with an aggressive, slip-resistant tread design. Easy to install on any Marseal® membrane. Can withstand heavy duty foot and equipment traffic. Resistant to mild acids, caustics, and hydrocarbon-based derivatives.

M-8000

Sealing Strip

Marseal® sealing strip manufactured using M-8000 sheet lining. It is used for sealing all end laps, repairing holes or punctures and for wall corner reinforcement with M-7000 or M-8000 membrane systems.

M-2000

Sealing Strip

Marseal® sealing strip manufactured using M-2000 sheet lining. It is used for sealing all end laps, repairing holes or punctures and for wall corner reinforcement with M-3500 or M-4000 membrane systems.